While Working for Imagepoint Inc. we were given the opportunity to design a locker room emblem for the UT Football team inside the newly reburshed locker rooms in Neyland Stadium. Using the archetects guideline drawings we came up with this three part design in which all drawings were created by myself.
This set of instructions were made for QU-BD on my free time. I was/am not employed by them, but had backed there Kickstarter project for a Open Source 3D Printer. I decided, on my own, to help the OneUp and TwoUp community by making these instructions to use in order to build their printers when they arrived with as little headaches as possible. QU-BD liked them so much they asked me if they could use them as there official instructions for assembly. My user name in the community is what's shown in the "Drawn by:" section.
Part of my duties and resposibilites while working for Imagepoint Inc. was creating installation drawing for our installers to follow. This is an example of a replacement face drawing created for some of the signage for John Deer
This is a board drawing of an Automatic Stop Box from my Drafting Class at ITT Technical Institute. It is drawn on three separate 11"x17" due to page constraints and the direction that it must be drawn at 1:1 scale.
Our Revit class at ITT Technical Institute required us to create a single story resteraunt. Location was our choice and design style and layout as well. Our requirements were that it must have 20 Tables and total square footage. The direction given to us throughout this project was only in what was physically possible. Our teacher was a licensed architect who graded us based on specific design requirments.
Our 3D Studio Design class at ITT Technical Institute required us to create a Product Design animation. Out only requirement was to use lighting and rendering setting that we had learned and that it had to be at least 30 seconds long but no more than 5 minutes,
Cape Hatteras Lighthouse is situated on the Outer Banks, North carolina. I have models that are 1"x5" and 2" x 10". No physical dimesions of the light house were available. This was modeled based on 3 pictures of the light house I had taken when I visted the light house in person.
The Coquille River Lighthouse is situated in Brandon, Oregon along the Coquille River. The model is 5 1/2" x 5 1/2" x 5 1/2" at max dimensions. No physical dimesions of the light house were available. This was modeled based on 1 picture of the light house I was able to find.
These organizers I designed myself. I created them for the need of organizing my home tool box. They have interlocking tabs on the bottoms so that they lock together to keep from sliding all around. I made it in both SAE and Metric sizes. I even had the models 3D printed to make sure they would work for what I designed them to
Just a simple Jewelry box I made just to play with a few new features in Autodesk Inventor 2013 from using Autodesk Inventor 2011.